BYK Logo

AQUACER 8086

Add to list
Wax emulsion on modified PE basis to improve surface properties of aqueous coatings and printing inks. Anti-caking additive for thermoplastics and hot-melt adhesives.
  • Only available in North America
Contact Us

Product Information

Product Shelf Life (month): 15

(in the unopened original packaging stored under conditions specified in the product documentation)

Product Group: Wax Additives

Product Family

AQUACER comprises BYKs aqueous wax emulsions. Wax additives have many areas of application. They can be used, for example, to control the processability of products or to improve the properties of surfaces. Waxes can be of a natural, semisynthetic or synthetic origin. The fundamental properties are derived from the chemical basis, the melting point and the polarity of a wax. BYK offers three lines of wax additives with water as the liquid phase: the wax emulsions AQUACER, the wax dispersions AQUAMAT, and the primary dispersions HORDAMER. The particle size of AQUACER wax emulsions is below 1 µm and these products can therefore be used in high gloss systems without reducing gloss.
Key benefits
  • Wax additives
  • Aqueous wax emulsions

Documents

Product Data & Information

Technical Data Sheet (1)

Format: PDF

Brochures

You will find further information on our products and application-related additive recommendations in our technical brochures.

Regulatory Information

BRIEF (2)

Format: PDF
Format: PDF

Safety Data Sheet (4)

Country: Canada
Format: PDF
Country: China
Format: PDF
Country: Mexico
Format: PDF
Country: United States
Format: PDF

Disclaimer

The information contained herein is based on our current knowledge and experience. No warranties, guarantees and/or assurances of any kind, either express or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding any products mentioned herein and data or information set forth, or that such products, data or information may be used without infringing intellectual property rights of third parties. Any information about suitability, use or application of the products is non-binding and does not constitute a commitment regarding the products’ properties, use or application. Contractual terms and conditions, in particular agreed product specifications, always take precedence. We recommend that you test our products in preliminary trials to determine their suitability for your intended purpose prior to use. To the extent we are not legally obliged to do so, any information herein regarding legal regulations reflect only our unbinding evaluation. The evaluation does neither preclude compliant use in additional regions nor applications nor does it limit your responsibility to evaluate the compliance with any regulations applicable to you.

We reserve the right to make any changes and to update the information herein without notice.